Scaling relationships,individual variation and the influence of temperature on maximum swimming speed in early settled stages of the turbot Scophthalmus maximus

Escape-swimming speeds (U _max) were studied in settled turbot (Scophthalmus maximus L.) reared at 18°C. Metamorphosis was complete at 4.0 cm total length (TL). U _max scaled in proportion to TL^0.74 in fish of 0.88 5o 8.00 cm TL at 18C. The scaling relationship for U _max was similar for temperatures between 13 and 23°C and could be fitted by the model: . U _max temperature-dependent, with a Q₁₀ of 1.77 over the temperature range studied. Analysis of covariance showed that U _max for farmed turbot was 14% lower than for wild fish filmed within 2 wk of capture; 3 mo after capture the average differences in escape performance were no longer significant, which suggests that the lower escape speeds of farmed fish are due to acclimation effects and not genetic stock differences. In order to assess the individual variability of U _max, 18 wild juvenile turbot [TL=6.2±0.4 cm (Week 1) to 7.5±0.5 cm (Week 17); means±SD] were maintained in individual containers at 18°C. U _max was determined weekly for 6 wk, standardised for fish length using the scaling relationship U _max=1.46 TL ^0.74, and individuals were ranked in order of performance. Temperature was reduced after 6 wk to 13°C, resulting in a significant decline in U _max from 104.0±14.4 to 87.8±12.5 cm s^-1 (means±SD). After 3 wk at 13°C U _max had increased to a level not significantly different from that at 18°C. Kendall's coefficient of concordance showed that repeatability of ranking of the experimental U _max of individuals was maintained over a 13 wk period and through temperature change. The results demonstrate that escape-swimming speeds in juvenile turbot are repeatable, individually variable, and can be modified in response to temperature acclination.     

Injuries as a Result of California Earthquakes in the Past Decade

The devastating effects of earthquakes have been demonstrated repeatedly in the past decade, through moderate and major earthquakes such as the October 1987 Whittier Narrows earthquake (5.9 on the Richter scale), the October 1989 Loma Prieta earthquake (7.1) and the January 1994 Northridge earthquake (6.7). While 'official' tallies of injuries and deaths are reported for each event, the numbers vary from report to report. For Northridge, the number of injuries vary between 8,000 and 12,000; the number of deaths from 33 to 73 (Peek-Asa et al., 1997; Durkin, 1996).While official estimates are commonly reported following disasters, the study of actual numbers, types and causes of casualties has not developed. In this paper, we identify the numbers and risk factors for injuries within community-based samples across three earthquakes in urban California. We first report the numbers and types of injuries in each earthquake and then identify risk factors specifically associated with the Northridge earthquake     

Climate pioneership and leadership in structurally disadvantaged maritime port cities

ABSTRACT

Innovative climate governance in small-to-medium-sized structurally disadvantaged cities (SDCs) are assessed. Considering their deeply ingrained severe economic and social problems it would be reasonable to assume that SDCs act primarily as climate laggards or at best as followers. However, novel empirical findings show that SDCs are capable of acting as climate pioneers. Different types and styles of climate leadership and pioneership and how they operate within multi-level and polycentric governance structures are identified and assessed. SDCs seem relatively readily willing to adopt transformational climate pioneership styles to create ‘green’ jobs, for example, in the offshore wind energy sector and with the aim of improving their poor external image. However, in order to sustain transformational climate pioneership they often have to rely on support from ‘higher’ levels of governance. For SDCs, there is a tension between learning from each other’s best practice and fierce economic competition in climate innovation.     

Passive sampling: partition coefficients for a silicone rubber reference phase

Silicone rubber sheeting can be used as a passive sampling device for hydrophobic organic contaminants in the environment to determine the available concentrations in water and sediments. Reliable sampler-water partition coefficients are required to determine the sampling rates and the dissolved contaminant concentrations in water and in sediment pore water. Log partition coefficients (logK(sr,w)) for silicone rubber-water have been estimated for 32 polycyclic aromatic hydrocarbons (PAHs), 2 deuterated PAH analogues and 32 chlorobiphenyls (CBs) using the cosolvent method, with methanol as cosolvent. Strong linear relationships were found with literature values for the corresponding log octanol-water partition coefficients (logK(ow)) for both CBs and PAHs, confirming that partitioning into the silicone rubber is strongly determined by the hydrophobicity of the compounds, which suggests logK(ow) is a good predictor of logK(sr,w) and that absorption is the main mechanism for accumulation of analytes into the silicone rubber polymer.     

Total versus inhalable sampler comparison study for the determination of asphalt fume exposures within the road paving industry

Exposure to asphalt fumes has a threshold limit value (TLV of 0.5 mg m(-3) (benzene extractable inhalable particulate) as recommended by the American Conference of Governmental Industrial Hygienists (ACGIH). This reflects a recent change (2000) whereby two variables are different from the previous recommendation. First is a 10-fold reduction in quantity from 5 mg m(-3) to 0.5 mg m(-3). Secondly, the new TLV specifies the "inhalable" fraction as compared to what is presumed to be total particulate. To assess the impact of these changes, this study compares the differences between measurements of paving asphalt fume exposure in the field using an "inhalable" instrument versus the historically used 'total' sampler. Particle size is also examined to assist in the understanding of the aerodynamic collection differences as related to asphalt fumes and confounders. Results show that when exposures are limited to asphalt fumes, a 1:1 relationship exists between samplers, showing no statistically significant differences in benzene soluble matter (BSM). This means that for the asphalt fume ACGIH TLV, the 'total' 37-mm sampler is an equivalent method to the "inhalable" method, referred to as IOM (Institute of Occupational Medicine), and should be acceptable for use against the TLV. However, the study found that when confounders (dust or old asphalt millings) are present in the workplace, there can be significant differences between the two samplers' reported exposure. The ratio of IOM/Total was 1.37 for milling asphalt sites, 1.41 for asphalt paving over granular base, and 1.02 for asphalt over asphalt pavements.     

Genetic evidence for the occurrence of a cryptic species with the littoral nemerteans Lineus ruber and L. viridis (Nemertea: Anopla)

Lineus ruber and L. viridis are common intertidal heteronemerteans found on the coasts of northern Europe and the east coast of North America. The two species resemble each other morphologically and were synonymised for many years prior to being separated on the basis of larval development. In this study, specimens of L. ruber and L. viridis were collected from sites along the west and southwest coast of Britain, northern France and the east coast of North America. The external morphology and allele frequencies of isozymes of the two species were compared from all sites. The external morphology of L. ruber and L. viridis was similar but they could generally be separated by colour. Allele frequencies for up to 13 enzyme loci between sympatric populations of L. ruber and L. viridis indicated that these two species are genetically very different (Nei's genetic identity=0.090 to 0.083). Allele-frequency data also indicated the presence of a third genetic type occurring sympatrically with populations of both L. ruber and L. viridis on the coasts of Britain and France but not on the coast of North America. Fixed differences in allele frequencies between populations of the third genetic type and sympatric populations of L. ruber and L. viridis were observed across multiple loci. Genetic identity between the third genetic type and sympatric populations of L. ruber and L. viridis were extremely low (Nei's genetic identity =<0.078). Such large genetic differences between populations indicate a barrier to gene flow and reproductive isolation. The aberrant type, which exhibits sufficient morphological variation to prevent individuals being distinguished from those of both L. ruber and L. viridis, therefore represents a separate species. The low genetic identities found in intrageneric comparisons of species found in this study have been found in other studies on nemerteans. They may indicate systematic problems within these groups or other phenomena such as morphological stasis.     

Dispersion of displaying male sage grouse

Summary The degree to which male sage grouse select lek sites and females select nesting sites to maximize proximity to the other sex was examined by contrasting male dispersions with the dispersions and movements of females in the months preceeding incubation. Wintering females exhibit highly overlapping ranges due to shared use of central refuging areas. In late winter and early spring, females move an average 9 km from wintering areas to select nest sites and males begin occupying leks. Pooled evidence suggests that females select nest sites independently of male dispersion whereas males adjust lek occupation so as to maximize proximity to females. Relevant observations include females visiting nest sites before leks, moving further to select a nest site than to select a lek, and increasing their distance to leks as a result of selecting nest sites. In addition, males avoid leks until females have moved to within 5 km of the arenas, abandon early season leks as local female densities drop, and exhibit dispersions in which mean ratios of females/male are similar across leks. Contrasts between predicted and observed dispersions of males showed that hotspot settlement models are adequate to explain male dispersions on very coarse scales (2 km or greater); on finer scales, habitat preferences of males and tendencies for males to cluster tightly must be invoked in addition to hotspots to explain specific lek sitings.     

Improving occupancy estimation when two types of observational error occur: non-detection and species misidentification

Efforts to draw inferences about species occurrence frequently account for false negatives, the common situation when individuals of a species are not detected even when a site is occupied. However, recent studies suggest the need to also deal with false positives, which occur when species are misidentified so that a species is recorded as detected when a site is unoccupied. Bias in estimators of occupancy, colonization, and extinction can be severe when false positives occur. Accordingly, we propose models that simultaneously account for both types of error. Our approach can be used to improve estimates of occupancy for study designs where a subset of detections is of a type or method for which false positives can be assumed to not occur. We illustrate properties of the estimators with simulations and data for three species of frogs. We show that models that account for possible misidentification have greater support (lower AIC for two species) and can yield substantially different occupancy estimates than those that do not. When the potential for misidentification exists, researchers should consider analytical techniques that can account for this source of error, such as those presented here.     

The characterisation of polycyclic aromatic hydrocarbons emissions from burning of different firewood species in Australia

Four kinds of woods used for residential heating in Australia were selected and burned under two burning conditions in a domestic wood heater installed in a laboratory. The selected wood species included pine (Pinus radiata), red gum (Eucalvptus camaldulensis), sugar gum (Eucalyptus cladocalyx) and yellow box (Eucalyptus melliodora). The two different burning conditions represented fast burning and slow burning, with the air inlet of the combustion chamber respectively 'full open' and 'half open'. By sampling and analysing particulate and gaseous emissions from the burning of each load of wood under defined experimental conditions, PAHs emissions and their profiles in the particulate and gaseous phases were obtained. 16 species out of the 18 selected PAHs were detected. Of these, seven species were detected in the gaseous phase and most were lower molecular weight compounds.Similarly, more than 10 species of PAHs were detected in the particulate phase and these were mostly heavier molecular weight compounds. Under both burning conditions, emission levels for total PAHs and total genotoxic PAHs were the highest for pine and lowest for sugar gum, with red gum being the second highest, followed by yellow box. Using the specific sampling method, gaseous PAHs accounted for above 90% mass fraction of total PAHs in comparison to particulate PAHs (10%). The majority of the genotoxic PAHs were present in the particulate phase. PAHs emission levels in slow burning conditions were generally higher than those in fast burning conditions.     

Accelerated seeded precipitation pre-treatment of municipal wastewater to reduce scaling

Membrane based treatment processes are very effective in removing salt from wastewater, but are hindered by calcium scale deposit formation. This study investigates the feasibility of removing calcium from treated sewage wastewater using accelerated seeded precipitation. The rate of calcium removal was measured during bench scale batch mode seeded precipitation experiments at pH 9.5 using various quantities of calcium carbonate as seed material. The results indicate that accelerated seeded precipitation may be a feasible option for the decrease of calcium in reverse osmosis concentrate streams during the desalination of treated sewage wastewater for irrigation purposes, promising decreased incidence of scaling and the option to control the sodium adsorption ratio and nutritional properties of the desalted water. It was found that accelerated seeded precipitation of calcium from treated sewage wastewater was largely ineffective if carried out without pre-treatment of the wastewater. Evidence was presented that suggests that phosphate may be a major interfering substance for the seeded precipitation of calcium from this type of wastewater. A pH adjustment to 9.5 followed by a 1-h equilibration period was found to be an effective pre-treatment for the removal of interferences. Calcium carbonate seed addition at 10 g l⁻¹ to wastewater that had been pre-treated in this way was found to result in calcium precipitation from supersaturated level at 60 mg l⁻¹ to saturated level at 5 mg l⁻¹. Approximately 90% reduction of the calcium level occurred 5 min after seed addition. A further 10% reduction was achieved 30 min after seed addition.